Need help?Do you have a question about the HP ProCurve 3500 and is the answer not in the manual?
General| Uplink Ports | 4 x SFP |
|---|---|
| Manageable | Yes |
| Form Factor | Rack-mountable |
| Routing Protocol | RIP-1, RIP-2, static IP routing |
| Features | Layer 3 switching, VLAN support, QoS, IPv6 support |
| Jumbo Frame Support | Yes |
| Dimensions | 44.3 cm x 25.4 cm x 4.4 cm |
| Operating Temperature | 0 to 50°C |
Introduces the HP ProCurve switches and details Non-PoE, PoE, and PoE+ models.
Describes the front and back panels, including ports, LEDs, buttons, and module slots.
Covers key features of the switches and details available yl modules for expanded connectivity.
Lists shipped items and essential precautions for safe installation and site preparation.
A detailed, step-by-step guide for installing the switch, including mounting and connections.
Procedures for installing optional yl modules, transceivers, and connecting external power supplies.
Steps to connect network cables to ports and establish a console connection for management.
Illustrates various network configurations using the switches for different scenarios.
Guidance on configuring 10-GbE ports for optimal performance and bandwidth utilization.
Guides on setting up the switch initially via console, including IP and passwords.
Explains how to manage the switch remotely using Telnet and web browser interfaces.
Detailed procedure for replacing the switch fan tray, including safety precautions.
Common issues, LED interpretation, and hardware diagnostic tests for troubleshooting.
Utilizes proactive features and procedures for updating switch software.
Steps to restore factory settings and information on obtaining customer support.
Details on switch dimensions, weight, voltage, current, and frequency ranges.
Information on operating conditions, noise levels, and safety compliance standards.
Data on compatibility with network technologies and laser safety standards.
Physical dimensions and environmental operating parameters for switch modules.
Technical details regarding optical power for transceivers used with modules.
Information on supported cable types, standards, and requirements for network connections.
Detailed pin assignments and wiring rules for twisted-pair Ethernet cables.
Essential safety guidelines including grounding, servicing, and hazard warnings.
Regulatory statements concerning electromagnetic compatibility for various regions.
Guidelines for the proper disposal and recycling of electrical and electronic equipment.
To Next Page