HP ProCurve 3500 - Switch Features and Modules

1-22
Introducing the Switch
HP ProCurve Switch yl Modules
Introducing the Switch
HP ProCurve Switch yl Modules
The HP ProCurve Switch yl Modules are components you can add to a HP
ProCurve yl switch to provide a variety of network connectivity options. The
following modules are available as of this printing:
Contact your ProCurve authorized networking products reseller or your
ProCurve representative for information on availability of other modules and
transceivers. You can also visit the ProCurve networking products Web site
http://www.hp.com/go/procurve to get more information.
Module Description
ProCurve Switch
3500yl 2p 10-GbE X2 +
2p CX4 Module
(J8694A)
1
4-port 10 Gigabit switch expansion
module. This module has two
Media Flex ports for supported
transceivers and two fixed CX4
ports.
HP ProCurve 10GbE 2-
Port SFP+/2-Port CX4
yl Module (J9312A)
4-port 10-GbE switch expansion
module. This module has two ports
for supported SFP+ transceivers
and two fixed CX4 ports.
The J8694A module requires switch software version K.11.00 or later to be installed in the switch.
The J9312A module requires switch software version K.14.50 or later to be installed in the switch.