HP ProCurve 3500 - Page 33

1-23
Introducing the Switch
Features
Introducing the Switch
Features
Figure 1-22. Front of Module J8694A
The ProCurve Switch yl Module J8694A has the following features:
■ Connectivity to both copper and fiber.
■ LEDs that provide information for each port on the link status, network
activity.
■ LEDs that provide information on Module power and Module fault
conditions.
■ “hot swap transceiver” support—you can add, replace, or change the type
of any of the transceivers that you use in the Media Flex ports, without
having to first remove the module, and without having to shut down the
switch.
Standards adherence:
■ IEEE 802.3ak CX4
■ IEEE 802.3ae XAUI
■ Compliant with X2 and MSA
ProCurve Switch 10-GbE yl Module
Module Power
and Fault LEDs
Extractor Handles
Retaining screw
Copper CX4 port connections
X2 slot port cover
Link and Activity LEDs
(one pair per port)