Industry Standard
Compliance
ACPI 2.0b Compliant
PCIe 3.0
PXE Support
WOL Support
Microsoft® Logo certifications
USB 2.0 Compliant
Server Power Cords
All Pre-configured Models servers ship with a high voltage server to PDU power cord.
NOTE:
HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cord that
connects to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to power
distribution units (PDUs) in data center racks and now ship standard with a PDU 6-foot C-14 to C13 power
cord (A0K02A). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the 6-
foot NEMA 5-15 to C13 power cord must be ordered separately (AF556A). See Power Cords section for
Power Cord options.
Power Specifications
To review typical system power ratings use the HP Power Advisor which is available via the online tool
located at URL:
www.hp.com/go/hppoweradvisor
.
NOTE:
Power Specification and Technical Content for supported power supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
Common Slot Power
Supply
NOTE:
Mixing of power supplies in the same server is not supported. All power supplies inside a server
must be exactly the same model. Mixing Gold, Platinum, and Platinum Plus certified power supplies is not
supported.
HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of
ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest
power supply efficiency without degrading system performance. HP CS power supplies are tested by the
Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HP
CS power supply options provide efficiency ratings of up to 94% (80 Plus Platinum) and are available in
three power output options - 460W, 750W, and 1200W - allowing the customer to "right-size" a power
supply for their specific server configuration. All HP Common Slot power sources are UL, CE Mark
Compliant, hot-plug and support redundant configurations.
NOTE:
Mixing of power supplies in the same server is not supported. All power supplies must be of the
same output and efficiency rating. If non-matched power supplies are inserted you will get errors and
operation will fail.
HP CS Platinum Plus power supplies are required when enabling HP's Power Discovery Services, a solution
that creates an automated, energy-aware network between IT systems and facilities. This allows your
company to reclaim millions of dollars in wasted power capacity and downtime costs across data centers.
For more information on HP's Power Discovery Services, go to:
www.hp.com/go/ipd
.
It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for
your needs. HP Power Advisor can be accessed at:
www.hp.com/go/hppoweradvisor
.
QuickSpecs
HP ProLiant DL360e Generation 8 (Gen8)
Standard Features
DA - 14327 North America — Version 36 — January 22, 2014
Page 7
To Next Page
Loading...
Need help?
General
