HP ProLiant DL380 Generation 5

Removal and replacement procedures 56
4.
Remove the battery pack from the air baffle ("Removing the battery pack" on page 54).
5. Remove all hard drive cables from the air baffle.
6. Remove the air baffle.
To replace the component, reverse the removal procedure.
FBDIMMs
To remove the component:
1. Power down the server (on page 30).
2. Extend or remove the server from the rack ("Remove the server from the rack" on page 31).
3. Remove the access panel ("Access panel" on page 32).
4. Remove the battery pack ("Removing the battery pack" on page 54).
5. Remove the air baffle ("Air baffle" on page 55).