To Next PageTo Next Page
Need help?Do you have a question about the HP ProLiant ML350 Generation 5 and is the answer not in the manual?
General| Maximum Processors | 2 |
|---|---|
| Form Factor | Tower |
| Memory | Up to 32GB DDR2 |
| Storage | SAS or SATA drives |
| RAID Support | Yes (RAID 0, 1, 5, 10) |
| Storage Controller | Smart Array E200i Controller |
| Drive Bays | 8 SFF SAS/SATA or 6 LFF SAS/SATA |
| Expansion Slots | 6 (3 x PCI-Express, 2 x PCI-X, 1 x PCI) |
| Network Controller | NC373i Multifunction Gigabit Network Adapter |
| Power Supply | 800W |
| Operating System Support | Windows Server, Linux, VMware |
Describes warranty service for replacement parts and associated conditions.
Lists physical parts of the server and their details.
Lists essential tools for performing maintenance tasks.
Covers critical safety guidelines, ESD prevention, and hazard symbols.
Outlines steps like powering down, rack access, and preparation.
Procedures for replacing bezels and access panels.
Procedures for hard drive blanks, cages, and hot-plug drives.
Procedures for replacing fans, air baffle, and heatsinks.
Procedures for replacing the CPU and FBDIMMs.
Procedures for replacing the motherboard.
Procedures for replacing the power supply unit.
Details SATA, SAS, ATA, and optical drive cabling configurations.
Guides for problem resolution and error interpretation.
Software for system administration and health monitoring.
Tools for setup, BIOS, and firmware updates.
Tool for performing server diagnostics and troubleshooting.
Identifies front panel parts, LEDs, and buttons.
Identifies rear panel parts, LEDs, and buttons.
Details motherboard components and status indicators.
Explains SAS/SATA drive indicators and their meanings.
Details operating conditions and server physical specifications.
Technical details for drives and FBDIMMs.
Defines common technical terms used in the manual.
