HP ProLiant ML350 Generation 5 - Storage and Drive Components

Removal and replacement procedures 32
3.
Remove the power supply.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To replace the component, reverse the removal procedure.
Hard drive blanks
To remove the component:
1. Open or remove the tower bezel ("Front bezel" on page 27).
2. Remove the blank.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.