HP ProLiant ML110 - G2 Server

Hot-plug SATA Drives
Installing the PCI Accessory Board
The
HP ProLiant ML110 Generation 2 server supports
five
PCI
bus slots.
•
Thr
ee 64-bit/10
0-MHz 3.3V
PCI-X
bu
s slots (P
CI1 to PCI3)
• One PCI-Ex
press x4 bus slot (PCI4)
• On
e 32-bit/33-MHz 5
V
PCI bus slo
t (PCI5)
Installing Memory
The HP ProLi
a
nt ML110 Generatio
n
2
server has four DIMM sl
ots
that supp
or
t up to 4
GB max
imum system memor
y
(1
G
B in
each of the four DIMM
slots).
The following gui
delines must be fol
lowed
when
memory
modules are be
ing added or replaced:
• Use only DDR 400 unb
uffered ECC and
n
on-ECC DIMMs in
256 MB, 512 MB, o
r
1 GB conf
i
guration.
•
Up to
tw
o DIMMs per channel, single-si
ded and/or
d
ouble-sided.
Channel A corresponds to th
e DIMM1 and
DIMM2 slots,
whi
le c
h
annel B corresponds to
the DIMM3 and
DIMM4 slots.
CAUTION:
DIMMs can be damage
d by improper handling.
Always use an an
ti-stati
c wrist str
a
p and grounding mat, and
discharge s
t
atic electricit
y
before
touching DIMMs.
The
DIMM
slots are structure
d
to ensure pr
op
er installation. If you
insert a
DIMM but it does
not fit easily into t
he sl
ot,
you
may
have
inserted it incorrectly. Reve
rse th
e orientation of
the DIM
M
and
insert it ag
ain.
Replacing the Processor
The LGA
775 CPU sock
et in the HP Pro
Lian
t
ML110
Gener
ation 2
server
suppor
ts an Intel
®
Pentium
®
4 pr
ocessor.
Obtaining Additional
Documentation
For additional
docume
ntation, refer
to the H
P
ProLiant
ML
110
Gene
ration 2 Server Support
CD. You can a
lso access addi
tional
in
format
ion and docume
ntation fr
o
m
th
e HP
website,
www
.hp.com
eith
er by co
n
nect
ing directly or th
r
oug
h th
e Suppor
t
CD.