Troubleshooting 163
•
•
•
Each target system has a system partition that is at least 32 MB in size.
Verification that the ROM version to which you are upgrading can be used
for all the servers or array controllers that you are upgrading.
Follow the instructions for the Remote ROM Flash procedure that
accompany the software.
Command-line syntax error
If the correct command-line syntax is not used, an error message describing the
incorrect syntax is displayed and the program exits. Correct the syntax, and then
restart the process.
Invalid or incorrect command-line parameters
If incorrect parameters are passed into command-line options, an error message
describing the invalid or incorrect parameter is displayed and the program exits
(Example: Invalid source path for system configuration or ROMPaq files).
Correct the invalid parameter, and then restart the process.
Access denied on target computer
If you specify a networked target computer for which you do not have
administrative privileges, an error message is displayed describing the problem,
and then the program exits. Obtain administrative privileges for the target
computer, and then restart the process. Be sure the remote registry service is
running on a Windows®-based system.
Network connection fails on remote communication
Because network connectivity cannot be guaranteed, it is possible for the
administrative client to become disconnected from the target server during the
ROM flash preparation. If any remote connectivity procedure fails during the
ROM flash online preparation, the ROM flash does not occur for the target
system. An error message describing the broken connection displays and the
program exits. Attempt to ascertain and correct the cause of connection failure,
and then restart the process.
To Next Page
Loading...
