HP ProLiant ML350 Generation 4 - Page 214

214 Reference and Troubleshooting Guide
Audible Beeps: 2 short
100 Series
Possible Cause: Only Type 0 and Type 1 Header PCI Devices are configured by
the system ROM. The device will not work unless the OS or device driver
properly configure the card. Typically this message only occurs when PCI cards
with a PCI to PCMCIA bridge are installed.
Action: Refer to the operating system documentation or the device driver
information that ships with the Type 2 PCI device.
List of Messages:
101-I/O ROM Error....................................................................................................................214
102-System Board Failure, CMOS Test Failed..........................................................................215
102-System Board Failure, Timer Test Failed ...........................................................................216
162-System Options Not Set ......................................................................................................216
172-1-Configuration Non-volatile Memory Invalid...................................................................
102-System Board Failure..........................................................................................................215
102-System Board Failure, DMA Test Failed............................................................................215
104-ASR Timer Failure..............................................................................................................216
163-Time & Date Not Set...........................................................................................................217
217
180-Log Reinitialized.................................................................................................................217
101-I/O ROM Error
Action: If the device is removable, remove the device and verify that the
message disappears. Update Option ROM for a failed device.
Audible Beeps: None
Possible Cause: Options ROM on a PCI, PCI-X, or PCI Express device is
corrupt.