HP ProLiant ML350 Generation 4

Troubleshooting 227
1611- Power Supply Zone Fan Assembly Failure Detected. Either...........................................230
1611-Power Supply Zone Fan Assembly Failure Detected. Single fan... ..................................230
1611-Primary Fan Failure (Fan Zone System) ...........................................................................231
1611-Redundant Fan Failure (Fan Zone System).......................................................................231
1612-Primary Power Supply Failure ..........................................................................................231
1615-Power Supply Configuration Error....................................................................................231
1615-Power Supply Configuration Error....................................................................................231
1615-Power Supply Failure, Power Supply Unplugged, or Power Supply Fan Failure in Bay X23
2
1616-Power Supply Configuration Failure.................................................................................232
1609 - The server may have a failed system battery. Some...
Audible Beeps: None
Possible Cause: Real-time clock system battery has lost power. The system will
lose its configuration every time AC power is removed (when the system is
unplugged from AC power source) and this message displays again if a battery
failure has occurred. However, the system will function and retain configuration
settings if the system is connected to the AC power source.
...configuration settings may have been lost and restored to defaults. Refer to server
documentation for more information. If you have just replaced the system battery,
disregard this message.
Action: Replace battery (or add external battery).
1610-Temperature Violation Detected. - Waiting 5 Minutes for
System to Cool
Audible Beeps: None
Possible Cause: The ambient system temperature exceeded acceptable levels.
Action: Lower the room temperature.
1611-CPU Zone Fan Assembly Failure Detected. Either...
...the Assembly is not installed or multiple fans have failed in the CPU zone.