Server Operations 23
b. Secure the server by tightening the thumbscrews.
Removing Front Tower Bezel
This server has a removable front bezel that must be unlocked and opened before
accessing the hard drive cage and removable media area, and before removing
the access panel. The door should be kept closed during normal server
operations.
Use the key provided with the server to unlock the bezel with a counterclockwise
turn.
If necessary, remove the front bezel.
Removing Access Panel
1. Loosen the two thumbscrews located on the left side on the front of the
chassis.
2. Slide the access panel back about 1.5 cm (0.5 in).
3. Lift and remove the access panel.
To Next Page
Loading...
