Hardware Options Installation 63
7. Connect the SCSI and power cables.
8. Replace the front bezel ("Removing Front Tower Bezel" on page 23
), if
applicable.
9. Replace the access panel ("Removing Access Panel" on page 23
).
Refer to the HP Internal Two-Bay Hot-Plug SCSI Drive Cage Installation
Instructions for additional information.
Redundant Hot-Plug Power Supply Option
WARNING: To reduce the risk of personal injury or
damage to the equipment, the installation of power supplies
should be performed only by individuals who are qualified in
servicing server equipment and trained to deal with products
capable of producing hazardous energy levels.
WARNING: To reduce the risk of personal injury from hot
surfaces, observe the thermal labels on each power supply or
module.
To Next Page
Loading...
