Hardware options installation 69
14.
Connect the optical drive and power cables to the optical drive.
15. Connect the optical drive SATA cables, (HP part number 448180-002) included with the Optical drive
option, to the SATA connectors on the system board.
16. Install the fan cage ("Remove the fan cage" on page 31), and then connect the fan cables.
17. Install the full-length PCI cards that were removed.
18. Install the system air baffle (on page 30).
19. If removed, install the PCI air baffle (on page 29).
20. For tower models, do the following:
a. Install the access panel (on page 26).
b. Return the server to an upright position.
21. For rack models, do the following:
a. Install the access panel (on page 26).
b. Slide the server back into the rack.
To Next Page
Loading...
