HP ProLiant BL460c Gen8 - User Manual

HP ProLiant BL460c Gen8 Server Blade
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 656396-001
March 2012
Edition: 1

HP ProLiant BL460c Gen8 Specifications

General

Product Type	Blade Server
Processor Sockets	2
Expansion Slots	1 x Mezzanine slot
Form Factor	Half-height
Processor	Intel Xeon E5-2600 v1/v2 series
Storage	Up to 2 SFF SAS/SATA/SSD
Networking	FlexibleLOM options
Management	HP iLO 4
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise, VMware

Summary

Operations

Power Up the Server Blade

Explains the procedures for powering on the server blade.

Power Down the Server Blade

Details methods for safely powering down the server blade.

Remove the Server Blade

Provides step-by-step instructions for removing the server blade.

Setup

Installing a Server Blade

Step-by-step guide for installing a server blade into the enclosure.

Hardware Options Installation

Drive Option

Instructions for installing SAS, SATA, or solid state drives.

Processor Option

Guides on installing processors and heatsinks.

Memory Options

Troubleshooting

Troubleshooting Resources

Software and Configuration Utilities

Intelligent Provisioning

HP ROM-Based Setup Utility

Battery Replacement

To Remove the Component

Electrostatic Discharge

Preventing Electrostatic Discharge