EasyManua.ls Logo

HP ProLiant BL460c

HP ProLiant BL460c
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HP ProLiant BL460c G6 Server Blade
User Guide
Part Number 501274-001
March 2009 (First Edition)

Other manuals for HP ProLiant BL460c

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant BL460c and is the answer not in the manual?

HP ProLiant BL460c Specifications

General IconGeneral
Processor Sockets2
Form FactorBlade
StorageUp to 2 SFF SAS/SATA drives
ManagementIntegrated Lights-Out (iLO) Advanced
Power SupplyHot-plug power supplies (depends on enclosure)

Summary

Component identification

Front Panel Components and LEDs

Details front panel parts, LEDs, and drive indicators.

System Board Components

Identifies key components on the server blade's system board.

Mezzanine Connectors and DIMM Slots

Defines mezzanine connectors and shows DIMM slot locations.

System Maintenance Switch and SUV Cable

Explains the maintenance switch and the SUV cable connections.

Operations

Powering Server Blade On and Off

Instructions for powering the server blade on and off using various methods.

Blade Removal and Access Panel Procedures

Guides on removing the server blade and access panel.

Setup

Installation Overview and Enclosure Setup

Outlines installation steps for enclosure and server blades.

Interconnect Mapping and Network Setup

Bay numbering, device mapping, and network connection.

Installing a Server Blade

Step-by-step guide for installing a server blade into the enclosure.

Hardware options installation

Drive and Processor Installation

Procedures for installing hard drives and processors with safety notes.

Memory Options and Configuration

Details memory subsystem, DIMM types, speeds, and configuration.

Mezzanine and TPM Installation

Guides for installing mezzanine cards and Trusted Platform Modules.

Cabling

Blade Cabling and Local Connectivity

Covers BBWC battery pack cabling and using the SUV cable for local access.

Local KVM and Media Device Access

Explains connecting for local KVM and accessing media via USB.

Software and configuration utilities

Deployment Tools and Methods

Introduces deployment tools, advanced management, and PXE deployment.

Configuration Utilities and Management Tools

Covers SmartStart, RBSU, ACU, ORCA, and management tools.

System Firmware, Utilities, and Updates

Details ROMPAQ, iLO 2, Erase Utility, StorageWorks, and system updates.

Management Software and Support

Covers SIM, Agents, Virtualization, Migration, Performance, and Remote Support.

Troubleshooting

Troubleshooting Resources and Preparation

Guides on finding resources and preparing the server for diagnosis.

Diagnostic Flowcharts and Problem Identification

Introduces flowcharts and methods for identifying issues.

Specific Problem Flowcharts

Details flowcharts for power-on, POST, OS boot, and fault indications.

Battery replacement

Battery Replacement Procedure

Step-by-step instructions for replacing the server's real-time clock battery.

Regulatory compliance notices

FCC, EU, and Other Compliance Information

Covers FCC, EU, Canadian, Japanese, and other regulatory notices.

Electrostatic discharge

ESD Prevention and Grounding Methods

Guidelines for preventing electrostatic discharge and proper grounding.

Specifications

Environmental and Server Blade Specifications

Lists environmental operating conditions and server blade physical dimensions.

Technical support

Contacting HP and Customer Self Repair

Information for contacting HP support and the Customer Self Repair program.

Acronyms and abbreviations

Glossary of Terms

Lists common acronyms and their definitions used in the manual.

Related product manuals