To Next PageTo Next Page
Need help?Do you have a question about the HP ProLiant BL460c G7 and is the answer not in the manual?
General| Processor Sockets | 2 |
|---|---|
| Chipset | Intel 5520 |
| Memory Slots | 12 DIMM slots |
| Form Factor | Blade |
| Processor | Intel Xeon 5600 series |
| Number of Processors | 2 |
| Memory | Up to 192GB DDR3 |
| Storage | Up to 2 SFF SAS/SATA drives |
| Storage Controller | HP Smart Array P410i Controller |
| Power Supply | Power is provided by the BladeSystem enclosure |
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
Details warranty service where HP provides replacement parts.
Lists and illustrates components of the server blade for identification.
Lists essential tools needed for hardware maintenance procedures.
Outlines general safety precautions before performing service.
Specific warnings for handling the server blade to prevent injury or damage.
Explains hazard symbols found on the equipment for user awareness.
Steps required to prepare the server blade before component removal.
Procedures for safely powering down the server blade for maintenance.
Step-by-step guide for safely removing the server blade from its enclosure.
Instructions for removing and replacing the server blade's access panel.
Procedure for removing and installing a hard drive blank.
Instructions for removing and replacing hard drives within the server blade.
Steps for removing and replacing the server blade's battery tray.
Guide to removing and installing the mezzanine connector cover.
Procedure for removing and replacing DIMM baffles.
Instructions for removing and installing DIMM memory modules.
Steps for removing and replacing a heatsink blank.
Procedure for removing and installing mezzanine cards.
Instructions for removing and replacing the hard drive backplane.
Guide for removing and replacing the front panel and hard drive cage.
Procedures for BBWC/FBWC cache module and battery/capacitor pack.
Steps for removing the cache module from the server blade.
Instructions for removing the BBWC/FBWC battery or capacitor pack.
Procedures for recovering data from BBWC and FBWC cache modules.
Specific steps to recover data from the BBWC module after a failure.
Steps to recover data from the FBWC module after a server blade failure.
Instructions for removing and installing the processor heatsink.
Procedure for removing and installing the server blade processor.
Steps for removing and replacing the server blade system board.
Instructions for removing and replacing the system battery.
Procedure for removing and installing the server blade release lever.
Steps for removing and replacing the server blade release button.
Information regarding the TPM and its replacement (not customer-removable).
Information on accessing troubleshooting guides for ProLiant servers.
Overview of HP Insight Diagnostics for server blade management and testing.
Details on the survey functionality for gathering hardware/software info.
Explanation of the IML for viewing system events and timestamps.
Information on installing HP Insight Remote Support for proactive service.
Details on standard and legacy USB support for server blades.
Specific cabling instructions for BBWC/FBWC components.
How to use the SUV cable for administration and diagnostics.
Guide to connecting local video and USB devices for server blade access.
Instructions for accessing the server blade using local KVM.
How to connect local media devices for configuration or updates.
Identifies and illustrates components located on the server blade's front panel.
Explains the status and meaning of front panel LEDs.
Identifies LEDs for SAS and SATA hard drives.
Interpretation of combined LED states for SAS/SATA hard drives.
Identifies and illustrates components on the server blade system board.
Defines mezzanine connectors and their PCIe capabilities.
Illustrates DIMM slot numbering and processor association.
Explains how to identify DIMM characteristics from labels.
Details the positions and functions of the system maintenance switch.
Identifies connectors and descriptions for the HP c-Class Blade SUV Cable.
Lists operating and non-operating environmental conditions.
Provides physical dimensions and weight specifications for the server blade.
