To Next PageTo Next Page
Need help?Do you have a question about the HP ProLiant DL380 G7 and is the answer not in the manual?
General| Processor | Intel Xeon 5600 series |
|---|---|
| Processor Sockets | 2 |
| Form Factor | 2U Rack |
| Management | HP Integrated Lights-Out 3 (iLO 3) |
| Memory | Up to 384 GB DDR3 |
| Storage | Up to 16 SFF SAS/SATA/SSD |
| RAID Controller | HP Smart Array P410i |
| Network | Embedded HP NC382i Dual Port Multifunction Gigabit Server Adapter |
| Expansion Slots | Up to 6 PCIe Gen2 slots |
| Power Supply | 460W, 750W, or 1200W |
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi |
Instructions on how to safely power down the server before servicing.
Procedures for extending the server out of its rack for access.
Steps to safely remove the server from its rack mounting.
Guidance on how to access the rear panel of the server for maintenance.
Instructions for removing and replacing the server's access panel.
Steps for removing and installing the internal air baffle for cooling.
Instructions for removing and installing the PCI riser cage.
Steps for removing and installing a hot-plug SAS hard drive.
Instructions for removing and installing a hot-plug power supply.
Steps for removing and installing the optical drive.
Instructions for removing and installing the Systems Insight Display.
Detailed steps for removing and installing the server processor.
Instructions for removing and installing DIMM memory modules.
Explanation of front panel LEDs and buttons and their status.
Description of the Systems Insight Display LEDs on the system board.
Interpretation of LED status combinations for system health.
Identification of components on the server's rear panel.
Explanation of rear panel LEDs and buttons and their status.
Identification of components on the server's system board.
Description of SAS and SATA hard drive LEDs.
Interpretation of SAS/SATA drive LED status combinations.
