To Next PageTo Next Page
Need help?Do you have a question about the HP ProLiant DL380 Gen9 and is the answer not in the manual?
General| Max Processors | 2 |
|---|---|
| Memory Slots | 24 DIMM slots |
| Expansion Slots | Up to 6 PCIe 3.0 slots |
| Form Factor | 2U rack |
| Processor | Intel Xeon E5-2600 v3 or E5-2600 v4 series |
| Storage | Up to 24 SFF SAS/SATA/SSD or 12 LFF SAS/SATA/SSD drives |
| RAID Support | HP Smart Array controllers with various RAID levels (0, 1, 5, 6, 10, 50, 60) |
| Power Supply | 500W, 800W |
| Management | iLO 4 (Integrated Lights-Out) |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise, VMware ESXi |
| Network | FlexibleLOM |
| Network Controller | Optional FlexibleLOM |
Details the various front panel components, including drive bays and connectors.
Explains the status and function of front panel LEDs and buttons.
Identifies components located on the rear panel of the server.
Illustrates and lists components found on the server's system board.
Provides instructions on how to power on the server.
Details the procedures for safely powering down the server.
Guidance on how to extend the server from its rack mounting.
Step-by-step instructions for removing the server from the rack.
Specifies required clearances for servicing and proper airflow.
Details the acceptable ambient operating and storage temperature ranges.
Outlines the electrical and power supply requirements for installation.
General guidelines for adding and managing hot-plug drives.
Information on supported drive types like SAS, SATA, and NVMe.
Step-by-step instructions for installing SAS or SATA hot-plug drives.
Instructions for installing NVMe drives into the server.
Overview of supported memory types, configurations, and compatibility.
Provides guidelines for optimal server and hardware option cabling.
Specific instructions for cabling the two-bay SFF drive cage.
Details on connecting HBAs and controllers to various server configurations.
Information on HPE Integrated Lights-Out for remote server management.
Explains the server's active health monitoring and logging system.
Details on using system utilities for server configuration and management.
Points to available guides for resolving common server problems.
Instructions for replacing the server's real-time clock battery.
Details on operating temperature, humidity, and altitude derating.
Provides physical dimensions and weight of the server.
Lists specifications for various available power supply options.
How to contact HPE support and access documentation and services.
Information on customer-replaceable parts and procedures.
