Software and configuration utilities 174
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or
in both modes.
Software or configuration utility Server mode
HPE iLO (on page 174)
Active Health System (on page 174)
iLO RESTful API support (on page 175)
Integrated Management Log (on page 176)
Intelligent Provisioning (on page 176)
Insight Diagnostics (on page 176)
Erase Utility (on page 177)
Scripting Toolkit for Windows and Linux (on page 177)
Service Pack for ProLiant (on page 178)
Smart Update Manager (on page 178)
UEFI System Utilities (on page 178)
HPE Smart Storage Administrator (on page 181)
FWUPDATE utility (on page 183)
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
HPE iLO
iLO is a remote server management processor embedded on the system boards of HPE ProLiant and
Synergy servers. iLO enables the monitoring and controlling of servers from remote locations. HPE iLO
management is a powerful tool that provides multiple ways to configure, update, monitor, and repair
servers remotely. iLO (Standard) comes preconfigured on HPE servers without an additional cost or
license.
Features that enhance server administrator productivity are licensed. For more information, see the iLO
documentation on the Hewlett Packard Enterprise website (http://www.hpe.com/info/ilo-docs).
Active Health System
The Active Health System monitors and records changes in the server hardware and system
configuration.
The Active Health System provides:
• Continuous health monitoring of over 1600 system parameters
To Next Page
Loading...
