Operations 31
o
Remove the server from the rack (on page 27).
4. Remove the access panel (on page 27).
5. Remove the PCI riser cage.
Install the PCI riser cage
1. Power down the server (on page 26).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
o Extend the server from the rack (on page 26).
o Remove the server from the rack (on page 27).
4. Remove the access panel (on page 27).
5. Install the PCI riser cage.
To Next Page
Loading...
