Operations 29
2.
Open the cable management arm. The cable management arm can be right-mounted or
left-mounted.
Remove the fan cage
To remove the component:
1. Power down the server (on page 26).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
o Extend the server from the rack (on page 26).
o Remove the server from the rack (on page 27).
4. Remove the access panel (on page 27).
5. Remove the fan cage.
To Next Page
Loading...
