Need help?Do you have a question about the HP ProLiant DL380 G3 and is the answer not in the manual?
General| Processor Sockets | 2 |
|---|---|
| Chipset | ServerWorks GC-LE |
| Storage | Ultra320 SCSI |
| Form Factor | 2U Rack |
| Processor | Intel Xeon |
| Memory | Up to 12GB PC2100 DDR SDRAM |
| Drive Bays | 6 hot-plug drive bays |
| RAID | Smart Array 5i |
| Network | Dual NC7781 PCI-X Gigabit NICs |
| Expansion Slots | 6 total: 2 PCI-X 100 MHz, 2 PCI-X 133 MHz, 2 PCI |
| Power Supply | Redundant |
| Operating System Support | Windows Server, Red Hat Linux, SUSE Linux |
Details and diagrams various internal system components and their part numbers for replacement.
Outlines essential safety precautions and warnings before performing any service operations on the server.
Provides steps to prevent damage to sensitive electronic components from electrostatic discharge.
Highlights critical warnings and cautions related to electrical shock, personal injury, and equipment damage during operation.
Details procedures required before accessing or removing server components, including rack extension and powering down.
Instructions on how to properly power down the server, including system shutdown and cord disconnection.
Guide on how to remove the server's outer access panel to reach internal components.
Instructions for removing and replacing hot-plug SCSI hard drives without powering down the server.
Detailed instructions for removing and replacing the hot-plug power supply units.
Instructions for removing and replacing hot-plug fans, crucial for server cooling and redundancy.
Guide for removing and replacing expansion boards installed in PCI slots 2 and 3.
Procedures for removing and replacing the battery-backed write cache enabler module.
Steps for removing and replacing the PCI riser cage assembly.
Guide for removing and replacing expansion boards installed in PCI slot 1.
Steps for removing and replacing the server's power converter module.
Detailed instructions for removing and installing DDR SDRAM DIMM memory modules.
Step-by-step guide for safely removing and installing the server's processor and heatsink assembly.
Procedures for removing and replacing the Processor Power Module (PPM).
Instructions for removing and replacing the Smart Array 5i Plus memory module.
Steps for removing and replacing the system board battery, which powers the real-time clock.
Comprehensive guide for removing and replacing the main system board.
Describes Insight Manager 7 as a web-based application for system administration and management.
Explains iLO technology for remote server health monitoring and management.
Explains the RBSU for configuring system devices, options, and OS settings.
Introduces SmartStart software for installing system software, drivers, and updates.
Provides a detailed map and list of components located on the server's system board.
Explains the meanings of various system LEDs and their combinations indicating server health status.
Explains the various combinations of hot-plug hard drive LEDs and their interpretations.
Provides detailed physical and electrical specifications for the HP ProLiant DL380 Generation 3 server.
To Next Page
