70 HP ProLiant DL380 Generation 3 Server Maintenance and Service Guide
4. Disconnect and remove the cable.
To replace the component, reverse the removal procedure.
Power Button/LED Cable
To remove the component:
1. Power down the server ("Powering Down the Server" on page 20).
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 18, "Removing the Server from the Rack" on page 21).
3. Remove the access panel ("Removing the Access Panel" on page 21).
4. Lift the Battery-Backed Write Cache Enabler bracket out of the chassis.
HP CONFIDENTIAL
File Name: 291916-3.doc Last Saved On: 5/19/03 10:29 AM
To Next Page
Loading...
