HP ProLiant DL380 G7 - System Maintenance Switch; NMI Functionality

Component identification 95
Item Description
16
Processor 1 DIMM slots
17
Secondary riser connector
18
SAS connector A
19
SAS connector B
20
Cache module connector
21
Fan connector 1
22
Fan connector 2
23
Fan connector 3
24
Fan connector 4
25
Fan connector 5
26
Fan connector 6
System maintenance switch
Position Default Function
S1
Off Off = iLO 3 security is enabled.
On = iLO 3 security is disabled.
S2
Off Off = System configuration can be
changed.
On = System configuration is locked.
S3
Off Reserved
S4
Off Reserved
S5
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
S6
Off Off = No function
On = Clear NVRAM
S7
— Reserved
S8
— Reserved
S9
— Reserved
S10
— Reserved
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
NMI functionality
An NMI crash dump enables administrators to create crash dump files when a system is hung and not
responding to traditional debug mechanisms.