HP ProLiant DL380 G6 User Manual

HP ProLiant DL380 G6 Server
User Guide
Abstract
This guide is for an experienced service technician. HP assumes you are qualified in the servicing of computer equipment and
trained in recognizing
hazards in products with hazardous energy levels and are familiar with weight and stability precautions for rack installations.
Part Number: 495624-003
February 2011
Edition: 3

HP ProLiant DL380 G6 Specifications

General

Processor	Intel Xeon 5500 and 5600 series
Processor Sockets	2
Chipset	Intel 5520
Memory	Up to 192 GB DDR3
Memory Slots	18 DIMM slots
RAID Support	HP Smart Array P410i Controller
Network	Gigabit Ethernet
Form Factor	2U Rack
Storage	SAS, SATA, and SSD
Drive Bays	8 SFF or 6 LFF
Network Controller	HP NC382i
Expansion Slots	6 PCI-e Gen2 slots
Power Supply	460W, 750W, or 1200W

Summary

Component Identification

Front Panel Components and LEDs

Details front panel elements, LEDs, and buttons for SFF and LFF models.

Systems Insight Display LEDs

Rear Panel Components and LEDs

Identifies rear panel connectors, slots, bays, and status indicators.

Server Operations

Server Power Management

Covers procedures for powering the server on, off, and standby modes.

Rack Installation and Panel Access

Server Setup and Configuration

Installation Services and Rack Environment Setup

Server Installation and Initial Setup Procedures

Configuration Utilities Overview

Introduces SmartStart, RBSU, and other management tools for server setup.

Hardware Options Installation

Processor and Memory Installation Procedures

Detailed guide for installing processors and DIMMs.

Drive, Expansion Board, and TPM Installation

PCI Riser and Hard Drive Cage Installation

Troubleshooting

Troubleshooting Resources and Pre-Diagnostic Steps

Guides, safety, and initial checks before troubleshooting.

Diagnostic Flowcharts and Symptom Analysis

Workflows and methods for identifying and analyzing server problems.

POST and Boot Problem Resolution Guides

POST Error Messages and Beep Codes Reference