Component identification  11 
Systems Insight Display 
LED and color 
Health LED   System power 
LED 
Status 
Power supply (amber) 
  Only one power supply is installed and 
that power supply is in standby. 
  Power supply fault 
  System board fault 
Power supply (amber) 
Amber  Green 
  Redundant power supply is installed and 
only one power supply is functional. 
  AC power cord is not plugged into 
redundant power supply. 
  Redundant power supply fault 
  Power supply mismatch at POST or 
power supply mismatch through hot-plug 
addition. 
Power cap (off) 
—  Amber  Standby 
Power cap (green) 
—  Flashing green  Waiting for power 
Power cap (flashing 
amber) 
—  Amber  Power cap has been exceeded 
Power cap (green) 
—  Green  Power is available 
 
 
 
IMPORTANT: If more than one DIMM slot LED is illuminated, further troubleshooting is required. 
Test each bank of DIMMs by removing all other DIMMs. Isolate the failed DIMM by replacing 
each DIMM in a bank with a known working DIMM. 
  
 
Rear panel components 
 
 
Item  Description 
1 
PCI slot 5 
2 
PCI slot 6 
3 
PCI slot 4 
4 
PCI slot 2 
5 
PCI slot 3 
6 
PCI slot 1 
7 
Power supply bay 2 
8 
Power supply bay 1 (populated) 
9 
USB connectors (2)