Hardware options installation 41
14.
Close the heatsink retaining bracket.
15. Remove the fan blanks in bays 5 and 6. For fan location and numbering information, see "Hot-plug fans
(on page 20)" or the label attached to the access panel.
16. Install the fans into bays 5 and 6.
17. Install the air baffle ("Remove the air baffle" on page 27).
18. Install the PCI riser cage.
19. Install the access panel (on page 24).
20. Install the server into the rack ("Installing the server into the rack" on page 31).
21. Power up the server (on page 22).
Memory options
To Next Page
Loading...
