Setup 20
• HP BladeSystem c3000 Enclosure and Tower Enclosure
Server blade signal
Interconnect
bay number
Interconnect
bay label
Notes
FlexLOM
1
—
Mezzanine 1
2
Four port cards connect to bay 2.
Mezzanine 2
3 and 4
Four port cards
Ports 1 and 3 connect to bay 3.
Ports 2 and 4 connect to bay 4.
Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must be configured with network interconnect
devices to manage signals between the server blades and the external network.
To Next Page
Loading...
