Hardware options installation 83
8.
Using the T-15 screws, secure the drive cage to the server.
9. If installed, remove the PCI air baffle (on page 28).
10. Remove any installed full-length PCI cards.
11. Remove the system air baffle (on page 30).
12. Remove the fan cage (on page 31).
13. Connect the mini-SAS cables to the drive backplane.
14. Connect the Mini-SAS cables to the Smart Array controller.
NOTE: For more information about connecting the cables to Smart Array controller, see the
documentation that ships with Smart Array controller option kit.
To Next Page
Loading...
