HP ProLiant ML350p - Page 101

Software and configuration utilities 101
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or in
both modes.
Software or configuration utility Server mode
HP iLO (on page 101)
Online and Offline
Active Health System (on page 102)
Online and Offline
Integrated Management Log (on page 103)
Online and Offline
Intelligent Provisioning (on page 103)
Offline
HP Insight Diagnostics (on page 104)
Online and Offline
HP Insight Remote Support software (on page 105)
Online
Erase Utility (on page 104)
Offline
Scripting Toolkit (on page 105)
Online
HP Service Pack for ProLiant (on page 106)
Online and Offline
HP Smart Update Manager (on page 106)
Online and Offline
HP ROM-Based Setup Utility (on page 106)
Offline
Array Configuration Utility (on page 109)
Online and Offline
Option ROM Configuration for Arrays (on page 110)
Offline
ROMPaq utility (on page 110)
Offline
Server QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the QuickSpecs on the HP website (http://www.hp.com/go/productbulletin). At the website, choose the
geographic region, and then locate the product by name or product category.
HP iLO Management Engine
The HP iLO Management Engine is a set of embedded management features supporting the complete
lifecycle of the server, from initial deployment through ongoing management.
HP iLO
The iLO 4 subsystem is a standard component of selected HP ProLiant servers that simplifies initial server
setup, server health monitoring, power and thermal optimization, and remote server administration. The iLO
4 subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface. This
design makes iLO 4 independent of the host server and its operating system.