Hardware options installation 90
ii.
Connect the long mini-SAS cables.
13. Fully install the LFF drive cage, and then secure it by tightening the T-15 screws.
14. Install the fan cage.
15. Install the air baffle.
16. For tower models, do the following:
a. Install the access panel (on page 23).
b. Return the server to an upright position.
17. For rack models, do the following:
a. Install the rack bezel (on page 22).
b. Install the access panel (on page 23).
c. Slide the server back into the rack.
18. Connect each power cord to the server.
To Next Page
Loading...
