HP Q.11.XX - Page 86

4-12
TACACS+ Authentication
Configuring TACACS+ on the Switch
< local | tacacs | radius >
Specifies the primary authentication method,
depending on the access method:
local — Authenticates with the Manager and Operator
password you configure in the switch.
tacacs — Authenticates with a password and other
data configured on a TACACS+ server.
radius — Authenticates with a password and other
data configured on a RADIUS server.
[< local | none | authorized >]
If the primary authentication method fails, determines
whether to use the local password as a secondary method,
to disallow access, or to allow access without authenti-
cation.
aaa authentication num-attempts < 1-10 >
Specifies the maximum number of login attempts allowed in
the current session. Default: 3