Need help?Do you have a question about the HP ProCurve 1700-24 and is the answer not in the manual?
General| Switching Capacity | 8.8 Gbps |
|---|---|
| Form Factor | Rack-mountable |
| Forwarding Rate | 6.5 Mpps |
| Jumbo Frame Support | Yes |
| Uplink Ports | 2 x Gigabit combo |
| MAC Address Table Size | 8000 entries |
| Features | QoS |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
| Operating Temperature | 0 to 45°C |
| Operating Humidity | 15% to 95% non-condensing |
Describes the physical components and ports of the network switch.
Details the status indicators on the switch front panel and their meanings.
Explains how to use the mode button to change LED display functions for ports.
Lists the key capabilities and technologies of the ProCurve Switch 1700-24.
Lists all components shipped with the ProCurve Switch 1700-24.
Outlines the sequential steps for installing the switch.
Provides essential safety and best practice guidelines for installation.
Specifies the necessary clearance around the switch for proper operation.
Describes how to confirm the switch is functioning correctly after initial power-up.
Provides instructions for physically installing the switch into a rack or cabinet.
Details the steps and considerations for mounting the switch on a wall.
Explains how to place and secure the switch on a flat surface.
Guides on how to safely connect the switch to electrical power.
Instructs on how to establish network connections using RJ-45 or mini-GBIC ports.
Explains the procedure for adding or removing fiber optic transceivers.
Covers the first steps to set up the switch, including accessing the web interface.
Provides instructions for adjusting a PC's IP settings for switch configuration.
Suggests further resources for more advanced configuration and features.
Offers common solutions for network and switch operational problems.
Explains how to interpret switch LED patterns to identify issues.
Details the process to reset the switch to factory defaults.
Describes methods to test switch functionality through reset procedures.
Provides information on obtaining technical assistance and support.
Lists information to gather before contacting technical support for efficient problem resolution.
Details the physical dimensions and weight of the switch.
Lists the electrical specifications, including voltage and current ratings.
Outlines the operating and non-operating environmental conditions for the switch.
Describes the types of network connectors supported by the switch.
Lists safety compliance standards applicable to the switch.
Provides information regarding laser safety for mini-GBIC modules.
Covers general safety warnings and precautions for using the equipment.
Details electromagnetic compatibility compliance for various regions.
Explains proper disposal procedures for electronic waste.
To Next Page
