What to do if the link light does not light when a cable is connected to HP Switch?
If the link light on your HP Switch doesn't illuminate when a cable is connected, first check for loose or visibly damaged connections. Ensure all connections are secure. If the problem persists, try using a different cable.
General| Ports | 8 x 10/100/1000Base-T |
|---|---|
| Switching Capacity | 16 Gbps |
| Forwarding Rate | 11.9 Mpps |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| Power Supply | Internal |
| MAC Address Table Size | 8000 entries |
| Management | Web-based |
Details the physical characteristics and components of the ProCurve Switch 1400-8G.
Explains the auto-sensing 10/100/1000Base-T ports and their connectivity capabilities.
Describes the status indicators on the switch front panel and their meanings.
Highlights the key functionalities and capabilities of the ProCurve Switch 1400-8G.
Lists the components that ship with the ProCurve Switch 1400-8G.
Provides a step-by-step guide for installing the ProCurve Switch 1400-8G.
Details important safety and operational precautions to follow during installation.
Explains how to prepare the installation location, including cabling and site selection.
Guides users on how to check if the switch is functioning correctly after powering it on.
Provides instructions on how to physically mount the switch in a stable location.
Details the steps for connecting the switch to an AC power source.
Explains how to connect network devices to the switch using RJ-45 connectors.
Offers common solutions for problems encountered with the switch.
Provides guidance on interpreting LED patterns to identify and resolve issues.
Describes methods for testing the switch's hardware functionality, including resetting.
Informs users on how to obtain support from HP for technical issues.
Lists information needed to efficiently contact HP support or a dealer.
Details the physical dimensions and weight of the ProCurve Switch 1400-8G.
Outlines the electrical voltage and current requirements for the switch.
Specifies operating and non-operating environmental conditions for the switch.
Describes the compatibility standards for the RJ-45 twisted-pair ports.
Lists the safety standards the switch complies with.
Provides essential safety warnings, cautions, and grounding guidelines for the product.
Details compliance with EMC regulations in the USA, Canada, and Australia/New Zealand.
Provides the Declaration of Conformity for the product within the European Community.
Explains the proper disposal procedures for waste electrical and electronic equipment in the EU.
To Next Page
