Need help?Do you have a question about the HP ProCurve 2824 and is the answer not in the manual?
General| Switching Capacity | 48 Gbps |
|---|---|
| Forwarding Rate | 35.7 Mpps |
| VLAN Support | Yes |
| Layer | Layer 2 |
| Rack Mountable | Yes |
| Jumbo Frame Support | Yes |
| Management | CLI, SNMP |
| Features | Link Aggregation, QoS |
| Dimensions | 1.7 inches |
| Ports | 24 x 10/100/1000 |
Provides a step-by-step guide for installing the switch, from site preparation to connecting cables.
Details critical safety and environmental warnings to follow before and during switch installation.
Instructions for installing or removing mini-GBIC modules for fiber-optic connections.
Procedure to confirm the switch is functioning correctly by checking its LEDs after powering on.
Guidance on mounting the switch in a rack, cabinet, or on a horizontal surface.
How to manage the switch remotely using Telnet or a web browser interface.
Common issues and initial steps to resolve network problems with the switch.
Interpreting LED patterns on the switch to identify and diagnose specific problem conditions.
Methods to test switch circuitry and operation, including resetting and checking console messages.
Procedure to reset the switch to its original factory default settings to resolve configuration issues.
To Next Page
