HP ProCurve 1410-8G - User Manual

1
HP ProCurve 1410-8G Switch Quick Setup Guide
For more detailed information to set up your switch, view or download the Installation and Getting Started Guide for your
switch at www.hp.com/go/procurve/manuals.
1. Unpack and check included parts. ■ Documentation kit
•Read Me First
• Quick Setup Guide
• Safety and Regulatory information
• Software License Agreement and Hardware Warranty
in
formation
■ Switch
■ Accessory kit (installation hardware)
■ AC power adapter (and power cord, if applicable)
2. Prepare for installation. To avoid personal injury or product damage, review the “Safety Precautions” on
page 3.
3. Connect power and verify that the switch power LED turns on. The switch does not contain a power switch. It is
turned on by connecting power through the AC power adapter supplied with your switch.
1
2
3
1
2
Power LED = On
© Copyright 2010 Hewlett-Packard Company, L.P.
The information contained herein is subject to change
without notice.
Printed in China
January 2010
5998-0339
*5998-0339*
QSG-1410-8G.fm Page 1 Monday, January 11, 2010 6:32 PM

HP ProCurve 1410-8G Specifications

General

Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
Jumbo Frames	Up to 9216 bytes
MAC Address Table	8K
Mounting Options	Wall
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing
Form Factor	Desktop
Ports	8 RJ-45 10/100/1000 ports

Summary

Unpack and Check Included Parts

Prepare for Installation

Connect Power and Verify LED

Install the Switch Hardware

Table or Desktop Mounting

Attach self-adhesive pads to the bottom corners of the switch for stability.

Wall or Under-Table Mounting

Use appropriate screws and follow template for secure wall or under-table installation.

Optional Switch Locking

Secure Power Connection

Connect Network Cables

Safety Precautions

Installation Warnings and Cautions

Essential guidelines and warnings for safe installation and operation, covering mounting and environment.