HP QuickSpecs HP Z8 G4 - Memory Configurations

QuickSpecs
HP Z8 G4 Workstation
Supported Components
c05527763 — DA - 15956 Worldwide — Version 3 — November 1, 2017
Page 12
AMD Radeon™ Pro WX 7100 1
st
GFX 8GB Graphics
Y
Y
Z0B14AA/AT
3
NVIDIA® Quadro® Sync II
Y
Y
1WT20AA
NOTE: NVIDIA® Quadro® GP100 and AMD Radeon™ Pro WX 9100 support available the first half of 2018
Memory
CTO
Factory
Configured
Option Kit
Option Kit
Part
Number
Support
Notes
DDR4-2666 ECC Registered DIMMs
8GB (1x8GB) DDR4-2666 ECC Reg 1CPU Memory
Y
Y
1XD84AA/AT
16GB (1x16GB) DDR4-2666 ECC Reg 1CPU Memory
N
Y
1XD85AA/AT
32GB (1x32GB) DDR4-2666 ECC Reg 1CPU Memory
N
Y
1XD86AA/AT
64GB (1x64GB) DDR4-2666 ECC LR Memory
N
Y
1XD87AA
NOTES:
For details on the supported memory configurations on the HP Z8 G4 Workstation, please refer to the System
Technical Specifications - System Board section of this document.
Sleep (S3 state) support:
- Sleep (S3 state) may not be supported with non-HP validated and qualified 64 GB LR DIMMs.
- Sleep (S3 state) not supported with 128 GB LR DIMMs
DIMMs should be equally distributed across all six memory channels for optimal performance.
Each processor supports up to 6 channels of DDR4 memory. To realize full performance at least 1 DIMM must
be inserted into each channel.
The CPUs determine the speed at which the memory is clocked. If a 2400MT/s capable CPU is used in the
system, the maximum speed the memory will run at is 2400MT/s, regardless of the specified speed of the
memory.
MT/s = Million Transfers per second
You cannot intermix LR DIMMs with Registered DIMMs. The system will not work.
The Z8 G4 is designed to work ONLY with DDR4 memory. The system will not work with DDR3 memory.
Multimedia and Audio Devices