HP QuickSpecs HP Z8 G4 - Page 62

QuickSpecs
HP Z8 G4 Workstation
Technical Specifications - Graphics
c05527763 — DA - 15956 Worldwide — Version 3 — November 1, 2017
Page 62
Devices Supported
NVIDIA® Quadro® P4000
NVIDIA® Quadro® P5000
NVIDIA® Quadro® P6000
Bus Type
Requires one free mechanical PCIe bus slot. 6-pin PCI or SATA power
connector
PCI Form Factor
Full Height, half length, single slot
Ports
2 RJ45 connectors for carrying frame lock signals over CAT5 cables.
BNC Connector for external house synchronization.
Internal Connectors
6 NVIDIA SLI® style edge fingers for connection to compatible GPUs
 Included with the board are 4 12-Inch Short Sync Cables to connect
to GPU's
 Included with the board are 2 24-Inch Long Sync Cables to connect
to GPU's
System Requirements
Requires one free mechanical PCIe bus slot. 6-pin PCI or SATA power
connector
Must be used with NVIDIA Quadro P4000, P5000 or P6000 graphics cards.
Requires Quadro driver version R375 or later.
Temperature -
Operating
0° to 55° C
Temperature - Storage
-40° to 60° C
Relative Humidity -
Operating
10% to 80%
Power Requirements
Board power dissipation: <15W
Operating Systems
Supported
Windows 10 64-bit
Windows 7 64-bit
Linux 64-bit
Kit Contents
Contains:
 Quadro Sync II Card
 4 x 12-Inch Short Sync Cables
 2 x 24-Inch Long Sync Cables (Two)
 Quick Start Guide