HP S14

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP S14 14” Portable Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
I/F Board*1
1
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps Panel*1
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
USB3.1 Type-C cable*1
1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0

HP S14 Specifications

General

Screen Size	14 inches
Panel Type	IPS
Aspect Ratio	16:9
Brightness	200 nits
Response Time	5 ms
Contrast Ratio	700:1
Resolution	1920 x 1080 (Full HD)
Weight	1 kg (2.2 lbs)
Input Ports	1 x USB-C

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

Components with a surface area greater than 10 sq cm, including I/F Board.

Batteries

All types of batteries, including alkaline and lithium coin or button styles.

Mercury-containing components

Components containing mercury, such as lamps and display backlights.

Liquid Crystal Displays (LCD)

LCDs with a surface area greater than 100 sq cm, including gas discharge lamps.

Gas Discharge Lamps

Components classified as gas discharge lamps.

External electrical cables and cords

Includes specific cable types like USB3.1 Type-C cable.

Plastics containing Brominated Flame Retardants

Plastics weighing over 25 grams, excluding PCBs or PCAs.

Components and parts containing toner and ink

Includes cartridges, print heads, tubes, vent chambers, and service stations.

Components and waste containing asbestos

Materials identified as containing asbestos.

Components, parts and materials containing refractory ceramic fibers

Materials containing refractory ceramic fibers.

Components, parts and materials containing radioactive substances

Materials identified as containing radioactive substances.

Tools Required

Screw driver

Standard tool for disassembly, size 2 specified.

Product Disassembly Process

Disassemble Rear Cover

Initial step to separate the rear cover from the monitor head.

Disassemble Interface Board

Remove interface board by releasing screws and disconnecting cable.

Disassemble Control Board and FFC Cable

Remove control board and FFC Cable after releasing screws.

Disassemble Main Assembly (MF)

Separate main assembly (MF) from bezel by releasing screws.

Disconnect eDP Cable

Disconnect the eDP cable from its connector.

Disassemble Panel from Bezel

Separate the display panel from the bezel.

Disassemble Bezel Components

Remove magnets, buttons, and rubber buttons from the bezel.

Release Glass from Bezel

Use a tool to release the glass from the bezel.