1.lens cap
2. power ON/OFF button
3. lamp warning indicator light
4. temperature warning indicator light
5. source button
6. menu ON/OFF button
7. auto image button
8. four directional select buttons
55
55
5
66
66
6
77
77
7
33
33
3
44
44
4
22
22
2
88
88
8
11
11
1
hp digital projector sb21
1. power cord
2. M1-A to VGA and USB
cable
3. 2.5mm mini phone jack
for composite video
cable
4. USB Mini-B 5-pin for
S-video input cable
5. M1-D to DVI-D and USB
cable (optional)
6. M1-A to HDTV/
component and USB
cable (optional)
powering the projector
1. Remove the lens cap.
2. Ensure that the power cord and signal
cable are securely connected.
3. Press the P
OWER ON/OFF button on the
control panel. The startup screen will be
displayed for 30 seconds and the blue
P
OWER indicator light will light up.
4. Turn on your video source (computer,
notebook, video player, etc.). The projector
will detect your source automatically.
connecting the projector
1. Make sure the projector and your
computer are turned off.
2. Unplug the mouse from the computer.
3. Connect the projector signal cable to the
projector and to either the
RGB or digital
port on the computer. Tighten the screws.
4. To enable the remote controls mouse
features, connect the projector signal cable
USB connector to the computer.
5. Connect the projector to other video
sources.
6. Connect the power cord to the projector
and the power source.
7. Turn on the projector first and then the
computer.
video output
S-video output
digital tuner output
antenna
RGB
USB
DVI
33
33
3
44
44
4
11
11
1
66
66
6
55
55
5
22
22
2
!!
!!
! CAUTION!
Unplugging the projector
while the fan is running
may reduce lamp life.
To Next Page
Need help?
General
