HP Scanjet 200 - HP Scanjet Specifications

Scanner specifications
Name Description
Scanner type Document flatbed scanner
Size (H x D x W) 44.5 x 274 x 373 mm (1.75 x 10.78 x 14.68 inches)
Supported size of
originals
Minimum size: 0.25 x 0.25 mm (0.01 x 0.01 inches)
Maximum size: 215.9 x 297.2 mm (8.5 x 11.7 inches)
Weight 1.76 kg (3.88 lbs.)
Scanning element Contact image sensor (CIS)
Interface USB 2.0 Hi-Speed and Full Speed
Hardware resolution HP Scanjet 300: 4800 x 4800 dpi, 48 bit
HP Scanjet 200: 2400 x 4800 dpi, 48 bit
Regulatory
information
Regulatory model identification number: For regulatory identification
purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is FCLSD-1104. This
regulatory number should not be confused with the product name (HP
Scanjet 200/300) or product number (L2734A for HP Scanjet 200;
L2733A for HP Scanjet 300).
Additional regulatory information about your scanner can be found in the
Scanjet 200 and Scanjet 300 scanner Regulatory Supplement.pdf file on
the HP Scanning Software CD.
Energy information Tier 2 Energy Star '09 compliant
NOTE: For the most current information about supported operating systems and
system requirements, visit
www.hp.com/support.
Environmental specifications
Name Description
Temperature Operating the scanner: 10° to 35°C (50° to 95°F)
Storage: -40° to 60°C (-40° to 140°F)
Relative humidity Operating the scanner: 15% to 80% noncondensing 10° to
35°C (50° to 95°F)
Storage: up to 90% noncondensing at 0° to 60°C (32° to
140°F)
Chapter 4
28 Technical information