To Next Page

To Previous Page

un-fasten the top cover

Begin disassembly only after completing steps 1 through 6

You are about to expose the interior of the scanner to the dust of the outside environment. the

scanner is very sensitive to dust; any dust particles that get into the carriage head can cause streaks in the

scanned image. Minimize the time that the top cover is off by having all the cleaning materials ready. Also

be sure to disassemble your scanner in a clean environment.

7 Using a Phillips screwdriver remove the four screws from the bottom of the scanner.

See the following illustration for the location of the screws.

location of the screws

Questions and Answers:

Need help?

Do you have a question about the HP Scanjet 3670 and is the answer not in the manual?

HP Scanjet 3670 Specifications

General