HP Scanjet 7000 User Manual

4 Care and maintenance
This section presents information about how to care for and maintain the scanner.
•
HP Scanner Tools Utility Maintenance tab
•
Order maintenance and scanning supplies
•
Clean the scanner glass
•
Clean the paper path
•
Clean the rollers
•
Replace the rollers
Occasional cleaning of the scanner helps ensure high-quality scans. The amount of care
necessary depends upon several factors, including the amount of use and the
environment. You should perform routine cleaning as necessary.
CAUTION: Before placing an item in the document feeder, make sure that the item
does not contain wet glue, correction fluid, or other substances that can be transferred
to the interior of the scanner.
Make sure there are no curls, wrinkles, staples, paper clips, or any other attached
material. Sheets should not be stuck together.
HP Scanner Tools Utility Maintenance tab
The Maintenance tab of the HP Scanner Tools Utility displays the scanner usage,
maintenance history, and settings. You can record scanner maintenance and change the
setting for maintenance alerts.
For detailed information, see the HP Scanner Tools Utility Help. To open the Help, press
the Tools button on the scanner front panel, and then click Help in the dialog box.
Order maintenance and scanning supplies
You can purchase maintenance parts for your scanner.
1. Visit the HP scanner parts Web site at
www.hp.com/buy/parts.
2. Select your language, and then click the arrow.
Clean the scanner glass
Both strips of glass in the scanner should be cleaned periodically. The two small strips
of gray reflective material should be lightly dusted if debris is present.
To clean the strips of glass, follow these steps:
1. Press the Power switch to the off position, and then disconnect the USB cable and
power supply from the scanner.
2. Open the scanner hatch.
Care and maintenance 19

HP Scanjet 7000 Specifications

General

Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	0 - 90 %
Operating relative humidity (H-H)	15 - 80 %
Package weight	10200 g
Sustainability certificates	ENERGY STAR
Input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	40 W
Display	LCD
Scanner type	Sheet-fed scanner
Product color	Black, Silver
Film scanning	-
Color scanning	Yes
Grayscale levels	256
Input color depth	48 bit
Maximum scan size	216 x 864 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	40 ppm
ADF scan speed (color, A4)	35 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	80 ipm
Duplex ADF scan speed (color, A4)	70 ipm
Safety	IEC 60950-1, CCC, GOST, BSMI, NOM
Minimum scan size	50.8 x 73.6mm
Image formats supported	BMP, JPG, PNG, TIF
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
Scanning media types supported	Card stock, Envelopes, Plain paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	49 - 120 g/m²
Scan to	E-mail
Sensor type	CCD
Scan drivers	ISIS, TWAIN, WIA
Scan file formats	BMP, DOC, HTM, JPG, OPF, PDF, PNG, RTF, TIFF, TXT, UNICODE, WPD, XLS, XPS
Daily duty cycle (max)	2000 pages
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	512 MB
Mac compatibility	No
Minimum processor	1.3 GHz
Minimum storage drive space	300 MB
Minimum system requirements	USB 1.1 CD-ROM 1024x768 SVGA
Compatible operating systems	Windows 7 Windows Vista Windows XP Professional (32/64-Bit) Windows XP Media Center Windows XP Home Windows 2000
Windows operating systems supported	Windows 2000, Windows XP Home, Windows XP Professional, Windows XP Professional x64
Electromagnetic compatibility	FCC, CISPR, ANSI, CAN/CSA–CISPR, EN, AS/NZS CISPR, CNS

Weight and Dimensions

Depth	280 mm
Width	320 mm
Height	246 mm
Weight	7280 g