Step 5. Connect the USB cable
Caution If you are connecting the scanner to a Windows computer and you have
not inserted HP CD 1 in the computer CD drive, do so before connecting the
scanner to the computer.
Use the USB cable that came with the scanner to connect the scanner to the computer.
Step 6. Test the installation
1. Place a single document in the ADF or on the scanner glass.
2. Make sure that a printer is attached to the computer or is available over the network.
3. Press the Copy (
) button.
4. A copy is sent to the default printer. If a printer is not attached to the computer, an
error message is displayed.
If an error message is displayed, see Troubleshooting on page 21.
Setup and Support Guide 9
English
To Next Page
Loading...