Scan Document To buttons
Windows
If HP Photosmart Software is installed on the computer, you can use the Scan Document
To button (
) to send a scan to a software program. If only HP Smart Document Scan
Software is installed on the computer, you can press the Scan Document To button to
open HP Smart Document Scan Software so that you can select a scan profile to use.
Macintosh
Use the Scan Document To button to send a scan to a software program.
Power Save button
Press the Power Save button to turn off the lamp and put the scanner in
power-save mode when you are not using the scanner. When you are
ready to begin scanning again, just press one of the front panel scan
buttons to turn the lamp back on and begin scanning immediately.
Cancel button
Press the Cancel button to cancel a scan in progress, or to cancel a series
of scans when you are scanning from the ADF.
Chapter 2
12 HP Scanjet 8300 series
English
To Next Page
Loading...