Program Procedure
Note Customizable button 2 must be set up
to scan two-sided documents. See Configure
the scanner customizable buttons.
Macintosh
Do one of the following:
– From the HP Device Manager, click Scan Document. The scan will contain
editable text.
– Press customizable button 2. The scan will contain editable text.
Note If the scanner does not perform a duplex scan, see Scanner does not
perform a two-sided scan (Macintosh).
3. Follow the onscreen instructions to complete the scan.
Scan a document for editable text
1. Do one of the following:
– Place the original face down on the scanner glass, as indicated by the reference
mark.
– Load the originals in the automatic document feeder (ADF). For more
information, see Load originals in the ADF.
2. Do one of the following tasks:
Windows
User Guide 25
To Next Page
Loading...