2. Locate the ADF access door on the underside of the ADF.
3. Press the tabs on the door, and then pull the door toward you until it detaches from
the ADF.
4. Locate the clear scan window inside the ADF and clean it with the ADF cleaning
cloth.
5. Locate the white strip on the inside of the access door and clean it.
6. Replace the ADF access door:
a. Position the door over the ADF opening.
b. Press the door into place until it both sides click shut.
7. Clean the clear scanning strip on the scanner bed. Wipe the clear area with an HP
ADF cleaning cloth, or a clean, dry, lint-free cloth.
User Guide 47
To Next Page
Loading...