Load originals
●
Document loading tips
●
Load documents
●
Load cards into the document feeder
Document loading tips
●
The maximum capacity of the document feeder is 50 sheets of 75 g/m
2
(20 lb) paper. When
using heavier paper, the maximum capacity is decreased.
● The maximum card capacity, for card stock up to 15 points, is approximately 9–10 cards.
●
Be sure that your documents are within these guidelines:
Width: 52 mm to 220 mm (2.1 in to 8.7 in)
Length: 74 mm to 3100 mm (2.9 in to 122 in)
Weight:
41 g/m
2
to 209 g/m
2
(11 lb to 56 lb)
●
Use the Auto detect size setting for page size, or set the page size to match the width and
length of the page that you are scanning.
●
The scanner document feeder can process cards that meet the following specifications:
Minimum size: 52 mm x 74 mm (2.1 in x 2.9 in)
Maximum size: 210 mm x 269 mm (8.3 in x 10.6 in)
Minimum weight:
253 g/m
2
(12 points or 102 lb)
Maximum weight:
326 g/m
2
(15 points or 120 lb)
●
Scanning the following types of documents might result in paper jams or damage to the
documents.
Wrinkled or creased documents Curled documents
Torn documents Documents with paper clips or
staples
Carbon paper Coated paper
Extremely thin, translucent paper Paper with adhesive notes or flags
attached
14 Chapter 2 Use the scanner
To Next Page
Loading...