HP Scanjet N6310 - Color and output control

Make copies
Use the Copy ( ) button to scan an original and send it to a printer.
To make copies, follow these steps:
1. Load the originals.
2.
Press the Copy (
) button. The copy is sent to the printer and the HP Copy dialog
box displays on the connected computer.
3. If you want to change the settings, such as number of copies or output type, follow
these steps:
a. Click Cancel in the progress dialog box.
b. Make the changes you want in the HP Copy dialog box.
c. Click Start. The copy is sent to the printer.
TIP: You can also make copies by clicking the HP Copy icon on the desktop.
Chapter 1
16 Use the scanner